How to make flexible chassis :1

1.Extending chassis hole in front and rear with 5.5 mm drill.

First, cut the tubes of the chassis about 3mm.

Next, extend the holes

When you extend holes, pierce the chassis.

In normal way, you don't have to pass through, but piercing is easy to make.

Make holes about 5.5mm diameter.

You can find holes pass through. 

Extend holes in front and rear too.

Next, I introduce you about "cutting center chassis".

Thank you!!

First, flexible chassis

First, I’m making normal flexible gimmick.

Flexible chassis I make is different from regular one,

because I aim to make it simply comparing with cases of other web site.

In fact, you take just one hour to make it with leutor of 5mm diameter.

-This time, use 'JR Reinforced N-04/T-04 Units' to make Rise Emperor. 

-Thus I use different parts in this case, 'JR Reinforced N-04/T-04 Units' will come at main chapter.

How to make :

1. extending hole of chas's in front and rear with 5.5mm drill
2. cutting center chassis
3. cutting off unnecessary parts 
4. sanding 
5. covering with short FRP
6. setting springs and stopping by the screw

I will explain about above next time.

Thank you!

My first Mini4WD

I decided on 'Zanguuse' the motif of machine to make next time.

Machine I made before was also Pokémon motif.

It is following.

Sanders!!

He is also cute!!

I will make Mini4WD of Pokémon motif in this way.

Thank you!

Motif of the design

What body design to go?   

I have not decided how to arrange the colors but to paint it tricolor of red, black and white.

By the way, do you know Pokémon?!

I love them!!

My favorite one is 'Zangoose ' among them.

So cute!! 

I would paint the machine red based on white, and insert black  as accent color like ‘Zangoose’.

It looks like pink not red?

Anyway, I'd like to make machine as the above.

Thank you!!

The whole design & plastic body

This time, I assemble "Rise Emperor".

Its body is plastic.

It should be big and heavy...

So I try to reduce weight.

The color coating is simple tricolor of red, black, and white.

Painting chassis parts same as the body, there would be sense of unity. It'd be cool !!

Speaking of Emperor Series, it's this light.

I don't like it...

So I wanna remove it, but it seems implanted...

If possible, I will cut it of well.

Chassis is MS to make flexible chassis.

It will be powered by two kinds of flexible gimmicks at the same time. 

Spring to use is eight !? lol

I scrape away large diameter barrel tire to thin tire.

(A white hard barrel tire is used.)

Bumper is rigid to reduce weight and make it simple.

This time, I won't install mass damper to offset the weight of the body. 

I am aiming at within the limit of weight which can damp.

I use “Tohoku damper” at the rear to make its jump forward-bent posture.

to sum up

-MS chassis powered by flexible gimmick 

-Large diameter thin tires 

-Rigid bumper on front and rear,   19mm roller

-3.5:1 gear

-Hyper-dash PRO motor

-Tohoku damper

The main problem is weight saving...

To what extent can plastic body be lighten ?

All plan to go !! 

First, I am making flexible chassis!

Look forward!

Thank you !!

Let’s create Mini 4WD !

Hi ! 

I'm ODN, fan of Mini 4WD in Japan,

While Mini 4WD must be popular all over the world, there may be not so much information.

I'm gonna write articles following.

-How to make flexible chassis

-About “Whale_system”

-Mini_4WD information in Japan

etc...

First. I'm gonna introduce you "RISE EMPEROR".

It would be powered by two kind of flexible-gimmicks.

Look foreword !

Thank you.