How to make flexible chassis :1

1.Extending chassis hole in front and rear with 5.5 mm drill.

First, cut the tubes of the chassis about 3mm.

Next, extend the holes

When you extend holes, pierce the chassis.

In normal way, you don't have to pass through, but piercing is easy to make.

Make holes about 5.5mm diameter.

You can find holes pass through. 

Extend holes in front and rear too.

Next, I introduce you about "cutting center chassis".

Thank you!!

First, flexible chassis

First, I’m making normal flexible gimmick.

Flexible chassis I make is different from regular one,

because I aim to make it simply comparing with cases of other web site.

In fact, you take just one hour to make it with leutor of 5mm diameter.

-This time, use 'JR Reinforced N-04/T-04 Units' to make Rise Emperor. 

-Thus I use different parts in this case, 'JR Reinforced N-04/T-04 Units' will come at main chapter.

How to make :

1. extending hole of chas's in front and rear with 5.5mm drill
2. cutting center chassis
3. cutting off unnecessary parts 
4. sanding 
5. covering with short FRP
6. setting springs and stopping by the screw

I will explain about above next time.

Thank you!